Understand what a pallet position is
A pallet position is one location intended to store one pallet. A bay that is two pallets wide and one pallet deep, with four usable storage levels, has eight pallet positions. Cost per position is more useful for comparing layouts than cost per bay, because bay heights, beam levels, and pallet counts may differ.
A lower price per position does not automatically mean a better design. It also matters whether those positions can be accessed and filled by your actual inventory.
What changes the cost?
- Rack type: Selective, double-deep, push-back, drive-in, and pallet-flow systems use different components and may need different handling equipment.
- Pallet size and weight: Heavy loads, nonstandard footprints, and taller loads can change beam sizes, frame ratings, and the number of usable levels.
- Building and layout: Clear height, column locations, rack-run lengths, aisle widths, and reserved operational space affect the quantity of rack material required.
- Installation and site conditions: Freight, anchoring, guardrails, decking, engineering, permits, floor or slab conditions, and work in an active warehouse can materially affect the final cost.
A simple budgeting example
Suppose a preliminary layout contains 1,000 pallet positions. Using an illustrative allowance of $100 per position for rack equipment gives a $100,000 equipment budget. Installation, freight, engineering, protection, permits, and any forklift changes still need to be evaluated.
This calculation is useful for early planning, but the total should not be treated as a supplier quotation. A final price requires an agreed layout, load specifications, and project scope.
Compare quotes using the same assumptions
Give prospective suppliers the same target pallet count, pallet dimensions and weights, clear height, building drawing, storage requirements, and forklift assumptions. Ask each supplier to show the number of usable positions and clearly identify what is included in the price.
When considering relocation, consolidation, or an expansion, compare the installed cost against the storage capacity each building can support. A building with more square footage does not necessarily hold more pallet positions or deliver a lower cost per usable pallet position.
Frequently asked question
Should I choose the rack system with the lowest price per position?
Consider forklift requirements, product access, operating labor, and how many positions your inventory can actually use. For example, double-deep racking may have a lower cost per pallet position, but if your inventory is a poor match for that configuration, you could pay for additional positions that remain unusable.
Test your warehouse layout
WhereHowSpace is a free tool for developing building-specific capacity layouts. A preliminary layout can help establish pallet-position counts and storage assumptions before requesting quotes from racking suppliers.
Rack pricing and layout feasibility are separate from final engineering, permitting, fire protection review, and installation requirements.
Open WhereHowSpace Calculator